Skip to content

Part List

This page provides all the details about the parts and component you will need to build the wheel.

Parts KIT

Support the project

This project is 100% open source and all the information is provided for free.

Thousands of hours were invested into this project, please consider supporting it by purchasing the parts kit from us.

While you can source and print all the parts youself , you can enjoy the following benefits while purchasing a kit from us:

  • Cheaper than buying all the parts yourself
  • No 3D printer required - 3D printed parts included
  • No soldering required - All components are soldered to the PCBs
  • Simple assembly - no special tools required
  • Everything is tested before shipping

 

If you are not getting the kit from us below is all the parts you will need to source and print:

3D Printed Parts:

3D printed parts can be found on ____

PCB Boards:

Image title

The project consists of the following pcb boards:

  • Main Board

    The boards that holds all the electronics, buttons, encoders etc.

  • Shifter Board X 2

    Holds the micro switch.

  • Shifter Side Board X 4

    Doesn't hold any electronics, acts as the side of the shifter.

  • Clutch Board X 2

    Holds the hall sensor.

  • Clutch Side Board X 4

    Doesn't hold any electronics, acts as the side of the clutch.

  • GX-12 Board

    Holds the GX-12 male connector

Hardware

Electronics

Cables and connectors